Revolving Cannon Tank v2.0

Blueprint

Blueprints can be imported into the game using Marc Robledo's SaveGame Editor for TotK . HyruleWorks is not responsible for any damages to your system or save file. Use blueprints at your own risk.

Parts

Tip: click on a part to see its location on TotK Object Map . Not all part locations are available.

Description

Re-balanced this thing to make it more stable on rough terrain while also allowing it to turn better. I took one of the electric motors from a shrine and decided to build a tank with a revolving cannon out of it. Only downside is that the motor is electric so in the rain you might want to wear something lightning/shockproof as it can shock you if you get wet and lightning likes to strike it. Though in the depths you don't need to worry about rain and lightning. I have a newer version that can cross water and climb cliffs but I'm still working out some issues. It looks like someone else added this here: https://www.hyruleworks.com/builds/60 I've added their blueprint file to this post

Instructions

Step 1

• 
  1 Motor

You will need to take an electric motor to use as the base for the cannon. You can fuse it to a shield and split it at Tarrey Town or attach something to it in a shrine then use autobuild to summon it.

Step 2

• 
  4 Beam Emitter
• 
  1 Shock Emitter
• 
  1 Cannon

Build the cannon using a cannon attached to the center of the rotating part of the motor. 4 beam emitters attached to the side of the rotating part of the electric motor. 1 shock emitter attached somewhere on the electric motor to power it.

Step 3

• 
  3 Cart
• 
  3 Sled
• 
  1 Steering Stick

Build the main frame. It should look something like this. The sled in the back should be about in the middle of the cart used for the roof, if it's too far forward you will not be able to use the steering stick. You can add a stabilizer if you want, but it's not needed.

Step 4

• 
  4 Big Wheel

Attach the front wheels to the bottom sled. The wheels should be attached to the thicker part of the white area on the sled. It's easier to attach them if you flip the tank onto its roof.

Step 5

• 
  2 Big Wheel

Attach the back wheels to the thicker part of the white area of the back sled. It's easier to attach them if you flip the tank onto its roof.

Step 6

• 
  2 Cart

Attach the side armor to both sides. I like to make sure the attachment point is where it is in the image but whatever works.

Step 7

• 
  1 Construct Head

Attach the construct head to the roof. It will want to snap to the front or center of the roof cart, but you can stop it from snapping by putting apples to the snap points then walk over and pick them up afterwards. Or you can just let it snap in place, but the cannon's downward firing angle may be impacted.

Step 8

Attach the cannon built in step 2 to the construct head. Make sure it's centered on the construct head. If you need to remove the cannon for re-centering, remove the construct head from the whole unit first instead as shaking to remove the cannon will make it disappear if you summoned it.

Step 9

To get in and out you will need to crouch under the side armor near the back. Go and blow up some enemy camps.

Tags